Rapid Prototype Zone

Posts Tagged ‘machine’

This is version #2
I used a new camcorder instead of a webcam.

If you look closely you can actually see it start the next layer of material!

A time lapse of this video sped up 4 times can be found here:

http://www.youtube.com/watch?v=XFaDNAE25bA

I hope you enjoyed this video.

PLEASE COMMENT, RATE, AND SUBSCRIBE!

www.printo3d.com

A time lapse version can be found here:

Duration : 0:9:57

Read the rest of this entry »

Rapid Prototyping Right Before Your Eyes is presented by Print To 3D.

Please comment, subscribe, and rate!

www.printo3d.com

This 3D printer is a Dimension 768 BST.

The cup is 1 inch tall and 1/2 inch in diameter. The base or floor of the cup is 40 thousands of an inch thick as are the sidewalls of the cup. The stem of the cup is 100 thousands of an inch in diameter.

This machine uses Fused Deposition Modeling or FDM for short.

The machine is basically a large hot glue gun!

Duration : 0:9:18

Read the rest of this entry »

This is the Fused Deposition Modeling (FDM) build of a small cup 4 times faster than normal. It really takes about 9 minutes to print.

The full unaltered version is here:

http://www.youtube.com/watch?v=OSJ12_sETlg

www.printo3d.com

Duration : 0:2:42

Read the rest of this entry »

Rapid Prototyping by Objet – post process applications 3D printed model on an Objet polyjet 3d printers.

Duration : 0:3:51

Read the rest of this entry »

A Japanese 3d printing company – Bandai, printing 3d models…excellent! Karim Rashid and Philip Starck would have been proud! http://www.objet.com/NewsEvents/IntheMedia/Video/tabid/267/Default.aspx

Duration : 0:6:2

Read the rest of this entry »

This is version #2
I used a new camcorder instead of a webcam.

If you look closely you can actually see it start the next layer of material!

A time lapse of this video sped up 4 times can be found here:

http://www.youtube.com/watch?v=G99lE_8Kqp0

I hope you enjoyed this video.

PLEASE COMMENT, RATE, AND SUBSCRIBE!

www.printo3d.com

Duration : 0:9:58

Read the rest of this entry »

http://www.fabathome.org

Fabbers (a.k.a 3D Printers or rapid prototyping machines) are a relatively new form of manufacturing that builds 3D objects by carefuly depositing materials drop by drop, layer by layer. Slowly but surely, with the right set of materials and a geometric blueprint, you can fabricate complex objects.

Believe it or not you can build your own fabber, Fab@home is a site with all what you need to build your own fabber, Our goal is to explore the potential of universal fabrication: Machines that can use multiple materials to fabricate complete, active systems.
Inspired by this history, the goal of this project is to offer an open-source, low-cost, personal SFF system kit, which we call “Fab@Home”. The aim of this project is to put SFF technology into the hands of those same curious, inventive, and entrepreneurial citizens. In addition, through this Wiki web site we hope to inspire users of Fab@Home to exchange their ideas for applications and their improvements to the hardware and software with us and each other. Several machines are already in use.

Duration : 0:1:40

Read the rest of this entry »

How Fused Deposition Modeling Works.

www.printo3d.com

Duration : 0:2:41

Read the rest of this entry »

www.printo3d.com

Duration : 0:2:46

Read the rest of this entry »

www.printo3d.com

Duration : 0:2:46

Read the rest of this entry »

This is the newest machine on the market. It has the fastest print time, lowest material cost and is the easiest to use.

Duration : 0:3:48

Read the rest of this entry »

This is the newest machine on the market. It has the fastest print time, lowest material cost and is the easiest to use.

Duration : 0:3:48

Read the rest of this entry »

Rapid Prototyping Machine FDM Stratasys

Duration : 0:1:1

Read the rest of this entry »

SLA rapid prototyping machine. Watch a rapid prototype being built using layer additive fabrication technology and laser power! This is the industry standard technology for building rapid prototype parts and masters for tooling using vacuum casting technology. Accurate to between 1-2% or 0.1/0.2mm whichever is the greater, SLA parts are proven to work better and have better surface finish and mechanical properties than most other rp technologies. Contact Martello today for a quote or visit our web site.

Duration : 0:1:15

Read the rest of this entry »

Rapid Prototyping Right Before Your Eyes is presented by Print To 3D.

www.printo3d.com

This 3D printer is a Dimension 768 BST.

The cup is 1 inch tall and 1/2 inch in diameter. The base or floor of the cup is 40 thousands of an inch thick as are the sidewalls of the cup. The stem of the cup is 100 thousands of an inch in diameter.

This machine uses Fused Deposition Modeling or FDM for short.

The machine is basically a large hot glue gun!

Duration : 0:9:18

Read the rest of this entry »