Rapid Prototype Zone

Posts Tagged ‘sls’

This video shows a basic process understanding of how laser sintering works.

Duration : 0:0:20

Read the rest of this entry »

User Interview – Polymeric SLS Process Explanation.
Interview with Ian Halliday or 3T RPD, UK.

Visit http://econolyst.co.uk/ for more information on Rapid Manufacturing.

Duration : 0:3:7

Read the rest of this entry »

User interview – SLS Part Coating and Finishing.
Interview with Ian Halliday of 3T RPD, UK.

Visit http://econolyst.co.uk/ for more information on Rapid Manufacturing.

Duration : 0:1:22

Read the rest of this entry »

This is the second version of my functional Fused Deposition Modeled (FDM) bearing.

The first one was a bit small and need to have bigger tolerances so that the balls did not seize to the bearing rings. Functional FDM Rapid Prototyped Bearing

Duration : 0:1:50

Read the rest of this entry »

This video is done at Center for prototyping and testing of industrial products, Osmaina University, Hyderabad, India. Selective laser sintering is an additive layer manufactruing technique and is more familiar as one of the Rapid Prototyping Technologies. The process follows a layer by layer building. This is video made using FORMIGA P100 of EOS Gmbh, Germany

Duration : 0:1:1

Read the rest of this entry »

Explications et visualisation du processus de frittage de poudre, une technologie de prototypage rapide, au sein de l’entreprise ARRK LCO Protomoule.

Duration : 0:1:32

Read the rest of this entry »

The Zcorp Z450 3D printer makes printing prototypes fast and affordable. Office friendly, reliable, and easy to use, the Z450 is an economical way to produce full 24bit color prototypes at a fraction of the cost of other technologies.

Duration : 0:4:1

Read the rest of this entry »

Greg Elfering presents the all-new sPro SLS Center – operating with DuraForm PP 100 on the floor at Euromold 2008.

Duration : 0:0:46

Read the rest of this entry »

Technology Focus: Polymeric – Selective Laser Sintering.
With Kevin Mcalea of 3D Systems.

Visit http://econolyst.co.uk/ for more information on Rapid Manufacturing.

Duration : 0:5:29

Read the rest of this entry »

Rapid Prototyping video, sla, sls rapid prototypes

Duration : 0:1:21

Read the rest of this entry »

Technology clip – SLS.
No Voiceover (video only).

Visit http://econolyst.co.uk/ for more information on Rapid Manufacturing.

Duration : 0:1:46

Read the rest of this entry »

This short tutorial shows you how to use www.halfpriceprototypes.com instant quote page. The HPP quote page allows you to enter the size and volume of your CAD model for an instant price quote for a rapid prototype model. HPP offers rapid prototypes and 3d printer models at half the price of most other service bureaus.

Duration : 0:3:46

Read the rest of this entry »

A tour of 3D System’s Rapid Manufacturing Center

Duration : 0:1:31

Read the rest of this entry »

3T RPD – http://www.3trpd.co.uk – The SLS process is self-supporting and parts can therefore be nested together. The selective nature of the laser process enables complex geometries to be achieved without compromising on functionality. Finished parts are surrounded by, and often contain, ‘unsintered’ powder – this loose powder is simply blasted away with an air gun and any post-processing work (ie. finishing or colouring) is then carried out.

SLS provides the highest level of functionality combined with speed that is currently available.

Duration : 0:2:59

Read the rest of this entry »

Frank Gehry eat your heart out.
(Don’t let grad students from El Salvador run your Sinterstation)

Duration : 0:0:42

Read the rest of this entry »

GPI Prototype – www.gpiprototype.com
Check out the strength of SLS Prototypes!
For more information & pricing, please visit our website at: www.gpiprototype.com

Duration : 0:0:15

Read the rest of this entry »

http://www.designworldonline.com/

ProtoCAM is the largest rapid prototyping service bureau in the Eastern United States, providing a unique blend of prototype manufacturing engineering and rapid prototyping consulting along with stereolithography and other advanced rapid prototyping techniques. ProtoCAM can help you get from plans to production in the shortest amount of time.

Duration : 0:2:17

Read the rest of this entry »

Video of vertical burn test performed side by side on regular SLS Plastic vs. the all new DuraForm FR100. In this video you can see how DuraForm FR100 extinguishes itself in a few seconds with no drip, after a two 12 second burn test are applied.

Duration : 0:1:24

Read the rest of this entry »

3T RPD Ltd – http://www.3trpd.co.uk – is a market leader in Rapid Product Development providing Rapid Prototyping and Rapid Manufacturing services to a diverse range of industry sectors, including Automotive, Aerospace, Dental, Medical, Architectural, White Goods, Marine, Defence and FMCG.

With the UKs largest Selective Laser Sintering (SLS) facility, we are now leading the way in the supply of metal parts using Direct Metal Laser Sintering (DMLS) throughout the UK and Europe

Duration : 0:1:40

Read the rest of this entry »

I put a better description later…
3D done in 3d Studio MAX and RP in HiQ use Polyamide- Nylon

Duration : 0:0:36

Read the rest of this entry »

I put a better description later…
3D done in 3d Studio MAX and RP in HiQ use Polyamide- Nylon

Duration : 0:0:36

Read the rest of this entry »

Various methods of rapid prototyping including examples of SLA, SLS, Thermojet Prototype, Parts produced from CAD via 3D Prinitng

Duration : 0:3:12

Read the rest of this entry »

Various methods of rapid prototyping including examples of SLA, SLS, Thermojet Prototype, Parts produced from CAD via 3D Prinitng

Duration : 0:3:12

Read the rest of this entry »

With the largest build chamber in the rapid prototyping industry, this system is designed specifically for Direct Manufacturing and large prototypes. See Sintering technology in action

Duration : 0:4:9

Read the rest of this entry »

User Interview – Example of SLS Rapid Prototpying.
Interview with Ian Halliday of 3T RPD, UK.

Visit http://econolyst.co.uk/ for more information on Rapid Manufacturing.

Duration : 0:2:7

Read the rest of this entry »